Iranian Journal of Materials Science and Engineering
Iran University of Science & Technology
Thu, Dec 12, 2024
[Archive]
Volume 12, Issue 3 (September 2015)
IJMSE 2015, 12(3): 48-55 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Amini A R, Zakeri A R, Sarpoolaky H. EFFECT OF A FOURTH COMPONENT (Na2O, SrO, MgO AND BaO) ADDITION TO CaO-Al2O3-SiO2 SYNTHETIC SLAG ON SULFUR REMOVAL FROM PLAIN CARBON STEEL. IJMSE 2015; 12 (3) :48-55
URL: http://ijmse.iust.ac.ir/article-1-829-en.html
URL: http://ijmse.iust.ac.ir/article-1-829-en.html
Abstract: (21132 Views)
In this paper, the effect of MgO, BaO, Na
2
O and SrO addition to a pre-melted CaO-Al2O3
-Si
2
O synthetic
slag on sulfur removal from plain carbon steel was studied under the same experimental conditions. The slags were
pre-melted at 1400°C in an electric resistant furnace and desulfurization experiments were carried out in a high
frequency induction furnace. The results showed that the optimum reaction time for desulfurization was 15 min. It was
found that while SrO addition to the ternary slag enhances the sulfur removal capability, MgO, Na
2O and BaO
additions reduce desulfurization efficiency of the ternary slag. Moreover, it was observed that restricting access to
oxygen from the atmosphere by using a covered crucible, could increase desulfurization efficiency of the slag by more
than two fold
Type of Study: Research Paper |
Subject:
forming and mechanical properties
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
